Power Supply | 3VDC (2x 1.5V AA Alkaline, replaceable) |
Battery Life | Standby: up to 8 years (at 20 C) Constant Alarm: up to 10 days (at 20 C) |
Dimensions | 110 (L) x 80 (H) x 45 (D) mm |
Ingress protection | IP65 |
Leak Sensor | Float Switch |
Cable Length | 3m |
Operating Temperatures | -10C to 50C |
Alarms | Leak/High Level */Sensor Fault/Disconnection/Low Battery |
On the front panel, there are 2 LEDs for visual indication and a touch button for test and hush functionality. There is a buzzer to sound an alarm when the device detects a leak, level*, or failure/disconnection of a float switch. Normal operation – the device is in standby mode to save the battery power, with no LEDs flashing, and no buzzer sounds.
Leak – when device detects a leak then top LED will flash every 1 second together with the buzzer sound. Touching the button for 2 seconds will hush the buzzer but LED will continue to operate.
Low battery – in that state the bottom LED will flash every 5 seconds, together with the buzzer sound. In this case the battery should be replaced asap. Touching the button for 2 seconds will hush the buzzer but LED will continue to operate.
Test mode – when touch button is hold, the unit will go to the test mode. In this mode both LED’s will flash, and buzzer sound every 1 second to confirm correct functionality.